An innovative ball joint system, which allows total freedom for positioning and cutting.
A SURPRISING WAY TO CUT HAM.
Position freely, excellent stability and safety, and no hindrance in the entire surface of the ham.
An uncluttered surface for easy cleaning after cutting.
No accumulations of waste.
Cut the ham resting on the board or suspended in the air. Disassembled for storage. Space optimization.
A current, attractive and distinctive, with a variety of finishes to choose and combine with the aesthetic environment.
A revolutionary piece that will change the way you cut ham.
CUT THE OTHER SIDE WITHOUT REMOVING THE HAM
Thread the crank. Place the ball in a horizontal position with the head of the screws to the back of the stand. Fix the ball turning the crank in the direction of clockwise.
Place the ham
Place the ham vertically with plant hoof downwards the front of the support. Use the allen key provided with the ham stand to drive in alternatively the two screws of the upper clamp in order to hold the ham as tight as possible. Repeat the above step with the lower clamp.
Free the ball by turning the handle counterclockwise and place the ham as desired, either resting on the board or above it. Once the ham is in the position you want, turn the handle clockwise to lock it in this position. Now your ham is ready to be cut and enjoyed.
Don’t take the ham out the holder until it is completely finished.
You have total freedom of movement. Turn the ham and switch to the position that you find most comfortable whenever you want.
Taste and enjoy your magnificent serrano ham
PDF INSTRUCTIONS AND ASSEMBLY TO DOWNLOAD
A NEW PRODUCT DESIGNED TO MAKE LIFE EASIER.
Simplicity is the key of brilliance
- Funcionality 25% 25%
- Clean 50% 50%
- Light 75% 75%
- Design 100% 100%
4 different models
Which one do you prefer?